Video Search
     
     
     
    Monitoring the Tank Water
     
     
  1. Monitoring the Hydrogen Peroxide Concentration Daily: Collect a Sample

  2. Monitoring the Hydrogen Peroxide Concentration Daily: Interpret the Hydrogen Peroxide Concentration

  3. Monitoring the Hydrogen Peroxide Concentration Daily: Take Action Based on the Hydrogen Peroxide Concentration

    4.  
     
    Cleaning and Disinfecting External Surfaces, Connectors, and Fittings
     
     
  4. Cleaning and Disinfecting Heater-Cooler External Surfaces: Clean and Disinfect the Vacuum Gauge

  5. Cleaning and Disinfecting Heater-Cooler External Surfaces: Clean All Accessible Device Surfaces

  6. Cleaning and Disinfecting Heater-Cooler External Surfaces: Disinfect All Accessible Device Surfaces

    7.  
     
    Changing the Water and Adding Hydrogen Peroxide
     
     
  7. Changing the Water and Adding Hydrogen Peroxide: Prepare for Filling

    8.  
     
    Cleaning and Disinfecting External Surfaces, Connectors, and Fittings
     
     
  8. Disinfect Tubing Connectors on the Heater-Cooler (6.3.2)

  9. Disinfect All Connectors and Fittings on the Tubing

    10.  
     
    Disinfecting the Water Circuits Every 14 Days
     
     
  10. Disinfecting the Water Circuits: Prepare for the Disinfection Procedure

  11. Disinfecting the Water Circuits: Drain the Water Tanks

  12. Disinfecting the Water Circuits: Fill the Water Tanks and Add Disinfectant

    13.  
  13. Disinfecting the Water Circuits: Mix the Tank Contents

  14. Disinfecting the Water Circuits: Run the Disinfectant Solution through the System

  15. Disinfecting the Water Circuits: Drain the Disinfectant from the Water Tanks

    16.  
  16. Disinfecting the Water Circuits: Rinse the Tanks Two (2) Times

    17.  
     
    Changing the Water and Adding Hydrogen Peroxide
     
     
  17. Changing the Water and Adding Hydrogen Peroxide: Drain the Water Tanks

  18. Changing the Water and Adding Hydrogen Peroxide: Fill the Water Tanks

  19. Changing the Water and Adding Hydrogen Peroxide: Mix the Tank Contents

    20.  
     
    Connecting the Aerosol Collection Set
     
     
  20. Prepare the Heater-Cooler

  21. Prepare the Aerosol Collection Canister

    22.  
     
    Test the Vacuum
     
     
  22. Connect the Aerosol Collection Set to the Heater-Cooler

  23. Test the Vacuum

    24.  
     
    Monitoring the Tank Water
     
     
  24. Monitoring the Water for Bacteria and NTM: Prepare to Collect a Water Sample

  25. Monitoring the Water for Bacteria and NTM: Collect the Sample





Terms of Use | Privacy Notice | LivaNova.com
© 2023 LivaNova LLC | eLearning by DDA Medical